Guides · Kitchens
Best kitchen taps UK: monobloc, bridge and pull-out choices
A specification-based UK kitchen tap shortlist comparing one-hole monobloc, two-hole bridge and pull-out taps by pressure, reach, hole count and published details.
Affiliate links: We earn from some links to Wickes through the Awin network. You do not pay more. How this works.
Start with the holes in the sink and the pressure at the tap. A handsome pull-out model that needs 0.9 bar is a poor buy on a weak gravity-fed hot supply; a two-hole bridge tap cannot replace a one-hole monobloc without changing the sink or worktop.
This researched shortlist uses the figures on current Wickes listings. We have not tested the taps. For the underlying formats and the listings' conflicting fields, see kitchen tap types compared.
Shortlist by use
| Tap | Layout | Published pressure | Useful when |
|---|---|---|---|
| Wickes Fiora | One hole, one lever, swivel swan spout | Features say 0.2 bar; specification says 0.3 to 5 bar | You want a simple monobloc and can confirm which minimum is correct |
| Wickes Vittoria | One hole, two levers, swivel spout | 0.2 to 5 bar in the specification | Separate hot and cold handles suit how you use the sink |
| Wickes Seattle | Two-hole bridge, two levers | 0.1 to 5 bar | An existing two-hole sink and a low-pressure hot supply |
| Abode Czar pull-out | One hole, one lever, pull-out spout | 0.9 to 5.5 bar | Hose reach matters and both supplies can meet the higher minimum |
Embed this infographic
<figure>
<a href="https://leatmere.co.uk/guides/best-kitchen-taps-uk/"><img src="https://leatmere.co.uk/assets/images/best-kitchen-taps-uk-infographic.webp" alt="Comparison infographic showing tap-hole layout, controls and published pressure for four kitchen taps"></a>
<figcaption>Infographic: Best kitchen taps UK from <a href="https://leatmere.co.uk/guides/best-kitchen-taps-uk/">Leatmere</a>.</figcaption>
</figure>
AI-generated explanatory illustration; the fittings are generic and not tested products.
Fiora monobloc: simple, but confirm the minimum pressure
We haven't tested this. Figures are as the maker states them (checked 13 November 2026).
The Fiora monobloc at Wickes is a one-hole, single-lever mixer with a swivel spout, flexible connectors and a published 245mm spout length. Its page conflicts with itself: the features say 0.2 bar, while the specification says 0.3 to 5 bar.
Do not average those figures. If your hot supply is gravity fed and close to either minimum, ask Wickes to confirm the current technical sheet before buying.
Vittoria monobloc: two handles through one hole
The Vittoria monobloc at Wickes keeps hot and cold on separate levers while using one tap hole. Wickes publishes a 0.2 to 5 bar range and a swivel spout.
Two handles can make temperature mixing more deliberate and give a traditional visual cue without needing a two-hole sink. It does not mean there are two separate spouts; the water still leaves through one outlet.
Seattle bridge: for a two-hole sink
The Seattle bridge tap at Wickes uses two holes and two levers. Wickes publishes 0.1 to 5 bar and a 203mm spout length.
That low published minimum makes it the relevant listing to investigate for a weak gravity-fed hot supply, but only if the sink already has the right hole spacing. Measure centres, worktop clearance and bowl reach before ordering.
Abode Czar: pull-out reach, with a higher pressure requirement
The Abode Czar pull-out at Wickes has a one-hole body, single lever, 200mm spout length and a pull-out hose. The page gives a 0.9 to 5.5 bar range and marks the WRAS field “No”.
The hose is useful for rinsing a large bowl or filling a vessel beside the sink. The trade-off is the higher minimum pressure and extra moving hose beneath the worktop. Make sure the hose can retract without catching bins, shelves or pipework.
Four measurements before you buy
- Hole count and centres. One hole for a monobloc; two correctly spaced holes for a bridge tap.
- Running pressure on hot and cold. A mixer is limited by the weaker supply.
- Spout reach and height. Aim the outlet into the bowl, not at the back edge or overflow.
- Space below. Allow for retaining hardware, flexible tails, isolation valves and any pull-out hose weight.
The kitchen sink guide covers bowl, worktop and waste compatibility. Check current price only after these dimensions are settled.
Is a pull-out tap better than a fixed spout?
It is more versatile for rinsing and reach, but it adds a hose and needs clear space below. It can also demand more pressure. Choose it for a task you will use, not simply because it has more parts.
Can I fit a two-hole bridge tap to a one-hole sink?
Not as a direct replacement. New holes may be impossible or unsafe in some sink and worktop materials. Match the existing layout unless a competent installer confirms the alteration.
Does “all pressure systems” mean every tap performs the same?
No. The Czar listing says “all pressure systems” yet publishes a 0.9 bar minimum, far above the Seattle's 0.1 bar. Use the numerical minimum for the exact tap.